Joint Meeting of

theScandinavian-Nordic and Italian Sections

 of the Combustion Institute

 

 

 

PRELIMINARY PROGRAM

 

Thursday 18

14:00 - 15:45

Registration

15:45-16:00

OPENING CEREMONY

 

16:00-16:45

Opening Lecture

Modelling of NO emission from co-combustion of coal and wood - a discussion on modelling

B. Leckner, Pia Kilpinen

Chalmers University of Technology, Göteborg, Sweden

Åbo Akademi University, Finland

 

16:45-17:00

Coffee Break

 

Session 1

Combustion of Solid Fuels

1.1   Extractive gas analysis from a burning fixed biofuel bed - method and measurements

M. Rönnbäck1, C. Tullin1, J. Samuelsson1, B. Leckner2, H. Thunman2

1. SP Swedish National Testing and Research Institute, Borås, Sweden

2. Department of Energy Conversion, Chalmers University of Technology, Göteborg, Sweden

1.2   Numerical simulation of two stage combustor

G. Scribano1, A.J. Griffiths2, N. Syred2

1. Dipartimento di Energetica – Politecnico di Milano, Italy

2. Cardiff School of Engineering – Cardiff University - U.K.

1.3   Particles emitted during combustion of single wood pellets - First measurements

L. Johansson1, L. Martinsson1, B. Leckner2, C. Tullin1

1. SP Swedish National Testing and Research Institute, Boras, Sweden

2. Department of Energy Conversion, Chalmers University of Technology, Göteborg, Sweden

1.4   Influence of Fuel Density on the Conversion Rate of a Fixed Biofuel Bed Operated in a Counter-Current Mode

H. Thunman, B. Leckner

Department of Energy Conversion, Chalmers University of Technology, Göteborg, Sweden

1.5   A Procedure for Particulate Emission Characterization During Fluidized Bed Combustion of Solid Fuels

M. Urciuolo1, A. Cammarota2, R. Chirone2, P. Salatino1

1. Dipartimento di Ingegneria Chimica - Università Federico II di Napoli, Italy

2. Istituto di Ricerche sulla Combustione - CNR, Napoli, Italy

1.6   Transversal Segregation of Gaseous Species During FB Combustion of a Biomass Fuel

A. Cante, R. Chirone, F. Miccio, F. Scala, A. Silvestre

Istituto di Ricerche sulla Combustione - CNR, Napoli, Italy

1.7   Velocity Measurements and Sampling Inside a Wood Open Fire Place to Optimise the Combustion Performances

T. Marchione1, B. Mandara1, C. Allouis2, F. Beretta2, F. Sabino3

1. Dipartimento di Ingegneria Chimica - Università Federico II di Napoli, Italy

2. Istituto di Ricerche sulla Combustione - CNR, Napoli, Italy

3. C.T.M. S.r.l., San Salvatore Telesino - ITALY

1.8   Reaction pathways and kinetics of coal combustion

O. Senneca1, P. Salatino2, S. Masi1

1. Istituto di Ricerche sulla Combustione - CNR, Napoli, Italy

2. Dipartimento di Ingegneria Chimica - Università Federico II di Napoli, Italy

1.9   TG-FTIR analysis of biomass and biomass components during devolatilisation

E. Biagini, L. Tognotti

Dip. di Ingegneria Chimica, Chimica Industriale e Scienza dei Materiali - Università di Pisa - Italy

1.10  Properties of chars obtained by fast pyrolysis of secondary fuels

E. Biagini, L. Tognotti

Dip. di Ingegneria Chimica, Chimica Industriale e Scienza dei Materiali - Università di Pisa - Italy

1.11  The Influence of the Devolatilisation Rate on the Reactivity of Chars from a Coal, a Biomass and their Blend

P. Ciambelli, V. Palma, P. Russo, S. Vaccaro, V. Vaiano

Dipartimento di Ingegneria Chimica e Alimentare, Università di Salerno, Italy

1.12  An Integrated Kinetic Based Modelling Approach to Alkali-Salt Formation and Deposition in Pf Boilers

M. Corsi1, M. Falcitelli2, C. La Marca1, S. Malloggi1, N. Rossi1, L. Tognotti3

1. ENEL S.p.A. Produzione Ricerca, Pisa, Italy

2. TEA Ambiente srl, Pisa – Italy

3. Dip. di Ingegneria Chimica, Chimica Industriale e Scienza dei Materiali - Università di Pisa - Italy

17:00-18:00

Oral outlining

18:00-19:00

Poster presentation

 

Friday 19

 

Session 2

Turbulent Combustion

2.1   Turbulent flames with realistic thermal expansion of burning matter

V. Bychkov

Institute of Physics, Umeå University, Sweden

2.2   Mixture Preheating Effects in a Bluff-Body Burner

R. Potami1, E. Giacomazzi2, B. Favini1, F.R. Picchia1, N. Arcidiacono1

1. Dept. of Mechanics and Aeronautics, University “La Sapienza”, Rome, Italy

2. ENE-IMP, ENEA, C. R. Casaccia, Rome – Italy

2.3   Modelling of Turbulent Combustion in Near-wall Flows

T. Myhrvold1, I.S. Ertesvåg2, I.R. Gran2

1. SINTEF Energy Research, Trondheim, Norway

2. University of Science and Technology, Trondheim, Norway

2.4   A Time-scale Analysis of Hydrogen Mixtures Combustion under Diluted Condition

G. Calchetti, V. Visentin

ENEA Casaccia Research Centre - ENE IMP Sec., Rome, Italy

2.5   Boundary conditions in subsonic compressible Navier-Stokes flows

P. Borrelli , Ø. Langørgen

SINTEF Energy Research, Trondheim, Norway

2.6   RANS, LES and Hybrid RANS/LES Turbulent Premixed Combustion TFC Model

V. L. Zimont, V. Battaglia

CRS4, Pula CA, Italy

2.7   Numerical Simulation of a Hydrogen Nonpremixed Turbulent Flame

M. Caprabianca1, G. Guj1, G. Calchetti2, E. Giacomazzi2, M. Rufoloni2

1. Department of Mechanical  and Industrial Engineering University “Roma TRE”, Rome, Italy

2. ENEA Casaccia Research Centre - ENE IMP Sec., Rome, Italy

2.8   Interactions Between Acoustic Waves and Turbulent Combustion with the Eddy Dissipation Concept

C.L. Iandoli1, I.S. Ertesvåg1, E. Sciubba2

1. Norwegian University of Science and Technology - Trondheim, Norway

2. University of Roma 1 ''La Sapienza" - Italy

2.9   Unsteady Characterization of a CH4/H2/Air Turbulent Non-Premixed Flame

E. Giacomazzi1, B. Favini2, C. Bruno2, F. R. Picchia1, N. Arcidiacono1

1. ENE-IMP, ENEA, C. R. Casaccia, Rome – Italy

2. Department of Mechanics and Aeronautics, University of Rome “LaSapienza” , Rome – Italy

2.10  Modeling explosion phenomena in compartmented vessels

A. Di Benedetto1, E. Salzano1, G. Russo2

1. Istituto di Ricerche sulla Combustione - CNR, Napoli, Italy

2. Dipartimento di Ingegneria Chimica - Università Federico II di Napoli, Italy

2.11  Pollutant emissions from diffusion flames with an integrated CFD procedure

S. Frigerio, A. Frassoldati, T. Faravelli, E. Ranzi

1. Dipartimento di Chimica, Materiali e Ingegneria Chimica, Politecnico di Milano, Italy

2.12  Experimental and numerical analysis upon a natural gas swirl combustor

S. Frigerio, A. Frassoldati, A. Coghe, G. Solero

CIIRCO - Centro Interdipartimentale di Ricerche sulla Combustione – Politecnico di Milano, Italy

2.13  Large Eddy Simulation of Flame Wrinkling in Turbulent Premixed Combustion

X.S. Bai, P. Wang

Division of Fluid mechanics, Lund Institute of Technology, Sweden

8:30-9:30

Oral outlining

9:30-10:30

Poster presentation

 

Session 3

Reaction Kinetics of Combustion

Waste Treatment and Reuse

3.1   Flame Structure of Counterflow n-Heptane/Air Partially Premixed Flames

P. Berta, S.K. Aggarwal, I.K. Puri, T. Faravelli, E. Ranzi

1. Mechanical Engineering Department - University of Illinois at Chicago, USA

2. Dipartimento di Chimica Industriale e Ingegneria Chimica - Politecnico di Milano, Italy

3.2   Automatic reduction of chemical mechanisms up to C10 applied to RIF calculations

T. Løvås, F. Mauss

Department of Combustion Physics, Lund Institute of Technology, Lund University, Sweden

3.3   An investigation of butadiene reactions as possible source of soot precursors

S. Fascella, C. Cavallotti, R. Rota, S. Carrà

Dept. Chimica, Materiali e Ingegneria Chimica, G. Natta-Politecnico di Milano, Italy

3.4   Detailed Mechanism for n-Heptane and iso-Octane Relevant for HCCI Engine Calculations

S. S. Ahmed, E. Blurock, F. Mauss

Division of Combustion Physics, Lund University of Technology, Sweden

3.5   Pyrolysis and Oxidation of Cyclo-Alkanes

A. Corradini, M. Riccio, A. Agosta, T. Faravelli, C. Cavallotti, R. Rota, E. Ranzi

Dipartimento CMIC, Politecnico di Milano, Milano - Italy

3.6   Residence Time Effect on Natural Gas Combustion in a Well-Stirred Reactor

M. de Joannon1, P. Sabia2, A. Tregrossi1, A. Cavaliere2

1. Istituto di Ricerche sulla Combustione - CNR, Napoli, Italy

2. Dipartimento di Ingegneria Chimica - Università Federico II di Napoli, Italy

3.7   Reactivation of FBC Spent Sorbents by Water and Steam Hydration

F. Montagnaro1, P. Salatino2, F. Scala3, C. Zucchini3, S. Russo3

1. Dipartimento di Chimica - Università Federico II di Napoli, Italy

2. Dipartimento di Ingegneria Chimica - Università Federico II di Napoli, Italy

3. Istituto di Ricerche sulla Combustione - CNR, Napoli, Italy

3.8   Fluidized Bed Pyrolysis of Two Plastic Wastes

M. Ponte, M.L. Mastellone, F. Perugini, U. Arena

Department of Environmental Sciences – University of Naples II (Caserta), Italy

3.9   The Life Cycle Assessment of Alternative Solid Waste Management Options. A case study

F. Perugini, M.L. Mastellone, U. Arena

Department of Environmental Sciences – University of Naples II (Caserta), Italy

10:30-11:15

Oral outlining

11:15-12:30

Poster presentation

 

12:30-14:30

Lunch Break

 

14:30-16:00

Members Meeting of the Scandinavian-Nordic Section of The Combustion Institute

 

16:00-16:45

Plenary Lecture

Topics in Combustion Dynamics

G. Continillo

Università del Sannio, Italy

 

16:45-17:00

Coffee Break

 

Session 4

Combustion Diagnostics

4.1   Raman scattering at 532 and 355 nm in rich flames, including effects from liquid fuel droplets

C. Dreyer1, T. Parker1, M.A. Linne2

1. Division of Engineering, Colorado School of Mines, Golden, USA

2. Department of Combustion Physics, Lund Institute of Technology, Sweden

4.2   Ballistic Imaging for the Liquid Core of a Spray

M. Paciaroni1, T. Hall1, T. Parker1, M.A. Linne2

1. Division of Engineering, Colorado School of Mines, Golden, USA

2. Department of Combustion Physics, Lund Institute of Technology, Sweden

4.3   Studies of Flame Propagation in an SI-engine using Laser-induced Fluorescence of CH20

H. Bladh1, C. Brackmann1, P. Dahlander2, I. Denbratt2, P. E. Bengtsson1

1. Combustion Physics - Lund Institute of Technology, Sweden

2. Thermo and Fluid Dynamics, Chalmers University of Technology, Gothenburg, Sweden

4.4   Synchrotron X-ray scattering diagnostics for the study of carbon-based particles and their precursors in relation to combustion

F. Ossler1, J. Larsson2

1. Division of Combustion Physics, Lund Institute of Technology, Sweden

2. Division of Atomic Physics, Lund Institute of Technology, Sweden

4.5   A Method to Avoid spatial laser-wing effects in laser-based spectroscopies for combustion diagnostics

M. Marrocco

Spectroscopy labs of ENE/IMP Section - ENEA, Rome, Italy

4.6   A novel particle trap for use with the gas quenching probe

K-Q Tran1, B-M Steenari1, O. Lindqvist1, J. Korsgren2, M. Hagström2, J.B.C. Pettersson2

1. Environmental Inorganic Chemstry - Chalmers University of Technology, Göteborg, Sweden

2. Physical Chemistry - Göteborg University, Sweden

4.7   Passive Measurements of Time-variable Signals of Pressure During FB Combustion of Liquid Fuels

M. Malato1, M. Miccio1, F. Miccio2

1. Dip. Ingegneria Chimica ed Alimentare - Università di Salerno, Italy

2. Istituto di Ricerche sulla Combustione - CNR, Napoli, Italy

4.8   Testing a novel instrument for Hg0 and Hg++ monitoring in flue gas

A. Bianchi, V. Borghini, I. Paolicchi, L. Casali, C. La Marca, M. Cioni

ENEL S.p.A., Generation and Energy Management Division, Research, Italy

4.9   Two-Dimensional Temperature Measurements in Flames using Filtered Rayleigh Scattering at 254 nm

J. Zetterberg, Z.S. Li, M. Afzelius, M. Aldén

Division of Combustion Physics, LTH, Lund University, Sweden

4.10  Experimental Analysis of Recirculation Phenomena in a Natural Gas Swirl Combustor

A. Coghe, G. Solero

Dipartimento di Energetica – Politecnico di Milano - Italy

4.11  Detection of Formaldehyde in Combustion Environments

M. Aldén, B. Axelsson, X. Bai, P.-E. Bengtsson, H. Bladh, C. Brackman, R. Collin, Z.S. Li, T. Metz, J. Nygren, F. Ossler, M. Richter

Division of Combustion Physics, LTH, Lund University, Sweden

4.12  Temperature Measurements using thermographic phosphors applied to combustion diagnostics

A. Omrane, F. Ossler, M. Aldén

Division of Combustion Physics, LTH, Lund University, Sweden

4.13  Gas-mixing in the splash region of a bubbling fluidized bed: flow structures associated with a single bubble bursting at the bed surface

R. Solimene1, A. Marzocchella1, R. Ragucci2, P. Salatino1

1. Dipartimento di Ingegneria Chimica - Università Federico II di Napoli, Italy

2. Istituto di Ricerche sulla Combustione - CNR, Napoli, Italy

17:00-18:05

Oral outlining

18:05-19:00

Poster presentation

 

Saturday 20

 

Session 5

Pollutant Formation and Control

5.1   Soot Diagnostics for Non-premixed and Partially Premixed Flames

M. Choinski, C. Arana, S. Sen, I.K. Puri

Department of Mechanical and Industrial Engineering, University of Illinois at Chicago, USA

5.2   The Catalytic Combustion of Soot: Mechanisms and Models

D. Fino, E. Cauda , G. Saracco, V. Specchia

Department of Materials Science and Chemical Engineering, Politecnico di Torino, Italy

5.3   Modeling of PAH and Soot Formation in Laminar Premixed Flames

S. Granata1,2, T. Faravelli1, W. H. Green2, J. B. Howard2, E. Ranzi1, H. Richter2

1. Dipartimento di Chimica, Materiali e Ingegneria Chimica, Politecnico di Milano, Italy

2. Department of Chemical Engineering, Massachusetts Institute of Technology, USA

5.4   Sulfation and Reactivation of Three Limestones in a Dry Desulfurization Process

M. Derudi1, D. Gelosa1, R. Rota1, G. Belz2, F. De Luca2, P. Caramuscio2

1. Dip. di Chimica, Materiali e Ingegneria Chimica “G. Natta” / CIIRCO - Politecnico di Milano, Italy

2. ENEL Produzione / Ricerca - Tuturano (BR) - Italy

5.5   Numerical Modeling of NOx Emission in a Highly Diluted Laminar Premixed Flame

F. Hermann1, T. Zeuch2, J. Klingmann1

1. Department of Heat and Power Engineering, Lund Institute of Technology,, Sweden

2. Institute of Physical Chemistry, University of Göttingen, Germany

5.6   Nano-sized Organic Carbon Emissions of an in-use Vehicle Powered with a “Common Rail” Diesel Engine

A. Borghese1, M.V, Prati1, L. Speranza2, L. A. Sgro2, P. Minutolo3

1. Istituto Motori - CNR, Napoli, Italy

2. Dipartimento di Ingegneria Chimica - Università Federico II di Napoli, Italy

3. Istituto di Ricerche sulla Combustione - CNR, Napoli, Italy

5.7   Characterization of Atmospheric Particulate Matter by Thermal Analysis

C. Grassi, L. Tognotti

Dip. di Ingegneria Chimica, Chimica Industriale e Scienza dei Materiali, Università di Pisa, Italy

5.8   The Chemical Structure of a n-Hexane Premixed Laminar Flame

A. Tregrossi1, V. Raimo2, R. Barbella1, M. Alfè2

1. Istituto di Ricerche sulla Combustione - CNR, Napoli, Italy

2. Dipartimento di Ingegneria Chimica - Università Federico II di Napoli, Italy

5.9   MALDI-TOF Mass Spectrometry and Size Exclusion Chromatography (SEC) approaches for molecular weight evaluation of combustion products

B. Apicella1, M. Alfè2, A. A. Herod3, A. Ciajolo1

1. Istituto di Ricerche sulla Combustione - CNR, Napoli, Italy

2. Dipartimento di Ingegneria Chimica - Università Federico II di Napoli, Italy

3. Department of Chemical Engineering, Imperial College, London, U.K.

8:30-9:15

Oral outlining

9:15-10:30

Poster presentation

 

Session 6

Pollutant Formation and Control

Combustion Control and Safety

6.1   Aromaticity of Carbonaceous Particulates by Means of Spectroscopic Analysis

M. Alfé1, B. Apicella2, R. Barbella2, A. Ciajolo2, A. Tregrossi2

1. Dipartimento di Ingegneria Chimica - Università Federico II di Napoli, Italy

2. Istituto di Ricerche sulla Combustione - CNR, Napoli, Italy

6.2   The perspective of TOF Mass Spectrometry application for on-line analysis of light hydrocarbons, PAH and particulates from combustion processes

B. Apicella1, T. M. Di Palma2, M. Alfè3

1. Istituto di Ricerche sulla Combustione - CNR, Napoli, Italy

2. Istituto Motori - CNR, Napoli, Italy

3. Dipartimento di Ingegneria Chimica - Università Federico II di Napoli, Italy

6.3   Modeling of nanoparticle and soot formation in a co-flowing diffusion flame

G. Mazzotti1, A. D’Anna2, J. Kent3

1. DETEC - Università Federico II di Napoli, Italy

2. Dipartimento di Ingegneria Chimica - Università Federico II di Napoli, Italy

3. School of Aerospace, Mechanical & Mechatronic Engineering, University of Sidney, Australia

6.4   Carbonaceous Nanoparticles Formed in a co-Flowing Diffusion Flame

A. Rolando1, C. Allouis2, A.C. Barone1, A. D’Alessio1, A. D’Anna1, P. Minutolo2

1. Dipartimento di Ingegneria Chimica - Università Federico II di Napoli, Italy

2. Istituto di Ricerche sulla Combustione - CNR, Napoli, Italy

6.5   Numerical Investigation of Primary Particle Shape of Soot Aggregates in Premixed Laminar Flames

M. Balthasar1, M. Frenklach2

1. Chemical Engineering, University of Cambridge, Cambridge, UK

2. Mechanical Engineering, University of California, Berkeley, USA

6.6   Characterization of Pollutant Emissions in a Radiant Tube Natural Gas Burner

G. Scribano1, G. Solero1, A. Coghe1, P. Gennaro2

1. Dipartimento di Energetica, CIIRCO, Politecnico di Milano, Italy

2. C.I.T.T. Impianti Srl, Bollate (Mi), Italy

6.7   Passive control of methane premixed industrial burner

M. Farnetti1, S. Giammartini2, E. Giacomazzi2, E. Giulietti1, R. Camussi1, R. Manfredi2

1. Dept. of Mechanical and Industrial Engineering, University “Roma Tre”, Rome, Italy

2. ENE-IMP, ENEA – C. R. Casaccia, Rome, Italy

6.8   Soft-sensors design for unsteady-state VOC after-burners

D. Fissore1, D. Edouard2, H. Hammouri3, A.A. Barresi1

1. Dipartimento di Scienza dei Materiali ed Ingegneria Chimica, Politecnico di Torino, Italy

2. LGPC-CNRS, CPE Lyon, Villeurbanne, France

3. LAGEP, UMR 5007, UCBL I, CPE-Lyon, Villeurbanne, France

6.9   Some Remarks about the Combustion Phenomena in Hybrid Rockets

A. Russo Sorge, C. Carmicino

Dipartimento di Scienza ed Ingegneria dello Spazio, Università Federico II di Napoli, Italy

6.10  CFD simulation of layered fuel-air explosions

F. Orlando1, F.S. Marra2, E. Salzano2, G. Russo1

1. Dipartimento di Ingegneria Chimica - Università Federico II di Napoli, Italy

2. Istituto di Ricerche sulla Combustione - CNR, Napoli, Italy

10:30-11:20

Oral outlining

11:20-12:30

Poster presentation

 

12:30-14:30

Lunch Break

 

14:30-16:00

Members Meeting of the Italian Section of The Combustion Institute

 

16:00-16:45

Plenary Lecture

Detailed kinetic modelling of soot formation in turbulent diffusion flows

F. Mauss

Department of Combustion Physics, Lund University, Sweden

 

16:45-17:00

Coffee Break

 

Session 7

New Concepts in Combustion Technology

Combustion Synthesis of Materials

Catalytic Combustion

7.1   Effects of fuel temperature and flame locations on combustion behaviors of LPG with high temperature air

W.H. Yang, W. Blasiak

Department of Material Science and Engineering, Royal Institute of Technology, Sweden

7.2   Flame Length above a Coaxial Burner with Oxygen Enrichment

M. Ditaranto, J. Hals

Department of Energy Processes – SINTEF Energy Research, Trondheim, Norway

7.3   Simulations of Premixed Combustion for the Industrial Gas Turbine

V.L.  Zimont1, V. Moreau1, V. Battaglia1, R. Modi2

1. CRS4, Pula CA, Italy

2. GE Nuovo Pignone, Florence, Italy

7.4   Mild combustion for fuel-NOx reduction

A. Effuggi, A. Cavigiolo, M.A. Galbiati, D. Gelosa,  R. Rota

Dip. di Chimica, Materiali e Ingegneria Chimica “G. Natta”/CIIRCO – Politecnico di Milano, Italy

7.5   The role of interparticle forces in fluidized bed reactors

P. Ammendola, R. Chirone

Istituto di Ricerche sulla Combustione - CNR, Napoli, Italy

7.6   Fullerenes formation in atmospheric pressure opposed flow oxy-flames

M. Silvestrini1, W. Merchan-Merchan1, H. Richter2, A. Saveliev1, L. Kennedy1

1. College of Engineering, University of Illinois at Chicago, USA

2. Dept. of Chemical Engineering, Massachusetts Institute of Technology, USA

7.7   High-Rate Growth of Vertically Aligned Carbon Nanotubes (VACNT’s) and Carbon Nanofibers in Opposed Flow Oxy-Flame of Methane

W. Merchan-Merchan1, A.V. Saveliev2, L.A. Kennedy2

1. Department of Materials Sciences and Engineering, University of Illinois at Chicago, USA

2. Department of Mechanical and Industrial Engineering, University of Illinois at Chicago, USA

7.8   Experimental Investigation of High Pressure Catalytic Combustion of Methane

J. Jayasuriya1, A. Ersson2, J. Fredriksson1, T. Fransson1, S. Järås2

1. Heat and Power Technology - KTH - The Royal Institute of Technology - Sweden

2. Chemical Technology - KTH - The Royal Institute of Technology - Sweden

7.9   Improved-performance over premixed metallic burners with perovskite catalysts

S. Specchia, A. Civera, G. Negro, M. Bizzi, G. Saracco

Dipartimento di Scienza dei Materiali ed Ingegneria Chimica, Politecnico di Torino, Italy

7.10  Nanostructured Pd perovskite catalysts for Natural Gas Combustion in CNG engines exhaust gases

C. Mussetto, D. Fino, A. Civera, S. Solaro, G. Saracco, V. Specchia

Dipartimento di Scienza dei Materiali ed Ingegneria Chimica, Politecnico di Torino, Italy

7.11  Comparison among different catalysts for methane combustion under very lean conditions

S. Cimino1, R. Pirone1, G. Russo1,2

1. Istituto di Ricerche sulla Combustione - CNR, Napoli, Italy

2. Dipartimento di Ingegneria Chimica - Università Federico II di Napoli, Italy

7.12  Effects of a Fast Exothermic Wall Reaction on Heat and Mass Fluxes in the Entrance Length of a Monolith

A. Di Benedetto1, F. Donsì1, F.S. Marra1, G. Russo1,2

1. Istituto di Ricerche sulla Combustione - CNR, Napoli, Italy

2. Dipartimento di Ingegneria Chimica - Università Federico II di Napoli, Italy

17:00-18:00

Oral outlining

18:00-19:00

Poster presentation

 

20:30

Conference Dinner

 

Sunday 21

 

Session 8

Internal Combustion Engines

8.1   Kinetic Modeling of the Influence of Fuel Composition on Ignition and Combustion Rate in HCCI combustion

J. Andrae, P. Björnbom

Department of Chemical Engineering and Technology – Royal Institute of Technology, Sweden

8.2   Knock Modeling: an Integrated Tool for Detailed Chemistry and Engine Cycle Simulation

A. Gogan1, L. Montorsi2, F. Mauss3, B. Sundén1

1. Department of Heat and Power Engineering, Lund University, Sweden

2. Department of Mechanical and Civil Engineering, University of Modena and Reggio Emilia, Italy

3. Department of Combustion Physics, Lund University, Sweden

8.3   Laser diagnostic applied to Homogeneous Charge Compression Ignition (HCCI) engines

M. Richter1, B. Johansson2, A. Aldén1

1. Lund Institute of Technology, Dept. of Combustion Physics, Lund, Sweden

2. Lund Institute of Technology, Dept. of Combustion Engines, Lund, Sweden

8.4   Visualization (PLIF) of Intermediates Generated in the Negative Valve Overlap of an HCCI Operated Engine

L. Koomans1, R. Ogink2, I. Denbratt1

1. Volvo Car Corporation, Göteborg, Sweden

2. Chalmers University of Technology, Göteborg, Sweden

8.5   Simulation of a Two-Stroke Free Piston Energy Converter

J. Fredriksson, I. Denbratt

Division of Thermo and Fluid Dynamics, Chalmers University of Technology, Göteborg, Sweden

8.6   Future trends in fuel design for compression ignition engines

G. Avolio1, C. Beatrice2, C. Guido1, N. Del Giacomo2, M.na Migliaccio2

1. D.I.M.E., Università degli Studi “Federico II”, Napoli, Italy

2. Istituto Motori C.N.R., Napoli, Italy

8.7   The Effect of Oxygenated Fuels on in-cylinder Soot Evolution via Two-colour pirometry technique

C. Bertoli1, M.na Migliaccio1, G. Avolio2, C. Guido2, G. Mincione2

1. Istituto Motori C.N.R., Napoli, Italy

2. D.I.M.E., Università degli Studi “Federico II”, Napoli, Italy

8.8   The evolution of fuel injection equipment for very small displacement diesel engine

C. Beatrice1, P. Belardini1, C. Bertoli1, M.na Migliaccio1, G. Mincione2

1. Istituto Motori C.N.R., Napoli, Italy

2. D.I.M.E., Università degli Studi “Federico II”, Napoli, Italy

8.9   Use of alternative fuels in heavy duty engines

E. Olsson, S. Hiljemark, S. Gjirja

Combustion Engine Research Center, Chalmers University of Technology, Göteborg, Sweden

8.10  Progress variables for Homogeneous Charge Compression Ignition (HCCI) engine combustion

P. Amnéus1, L. Montorsi2, F. Mauss1

1. Department of Combustion Physics, Lund University, Sweden

2. Department of Mechanical and Civil Engineering, University of Modena and Reggio Emilia, Italy

8.11  Prediction Tool for the Ion Current with Reference to SI Combustion

A. Ahmedi1, A. Franke2, H.S. Soyhan2, F. Mauss2, B. Sundén1

1. Department of Heat and Power Engineering - Lund Institute of Technology, Sweden

2. Department of Combustion Physics, Lund University, Sweden

8.12  Diesel Fuel Surrogate Oxidation Mechanism with Application to Spray Combustion Modelling

A. Häggström1, V. Golovitchev2

1. Scania CV AB – Södertälje – Sweden

2. Chalmers University of Technology – Göteborg – Sweden

8:30-9:30

Oral outlining

9:30-10:30

Poster presentation

 

Session 9

Stationary Combustors

Droplet and Spray Combustion

9.1   Validation of a flux method for radiative heat transfer in Plug Flow reactors

M. Filla

Dipartimento di Processi Chimici dell’Ingegneria - Università di Padova, Italy

9.2   NO Emission Formation in a Full-Scale Power Plant Co-Firing Biomass Gas and Pulverised Coal: A CFD-Modeling Study

P. Kilpinen1, S. Boström2, A. Jungar3

1. Åbo Akademi University, Process Chemistry Group, Laboratory for Industrial Chemistry, Finland

2. Process Flow Ltd Oy, Turku/Åbo, Finland

3. Schering Oy, Turku/Åbo,  Finland

9.3   Experiments in the New High-Pressure Combustor Rig at Lund

A. Lindholm, M. Aldén, T. Torrison, R. Gabrielsson, M. Linne

Lund University Combustion Center, Lund Institute of Technology, Lund, Sweden

9.4   Unconventional fuels experimental campaigns in enel sesta facility

M. Balestri1, D. Cecchini1, V. Cinti1, D. Gambacorta2, S. A. Miller2, A. Sobolevskiy2, J. Wu2, F. Bonzani3, G. Pollarolo3

1. ENEL Produzione Ricerca, Pisa, Italy

2. Siemens Westinghouse Power Co., Orlando, FL, USA

3. Ansaldo Energia, Genova, Italy

9.5   Influence of Air-Fuel Ratio and Comburent Temperature on Combustion Time of Air-Methane Mixtures in Stationary and Turbulent Condition

G.Langella1, A. F. Brancelli1, C. Mongiello2, M. de Joannon3

1. Dipartimento di Ingegneria Meccanica - Università Federico II di Napoli, Italy

2. ENEA -C.R. Casaccia, Rome, Italy

3. Istituto di Ricerche sulla Combustione - CNR, Napoli, Italy

9.6   Numerical Evaluation of Main Features of Chemical Models for Motor Fuel Surrogates

V. Golovitchev, R. Ogink

Chalmer University of Techology, Göteborg, Sweden

9.7   Electrically Assisted Sprays for Combustion Purposes

R. Ragucci1, A. Bellofiore2, A. Cavaliere2

1. Istituto di Ricerche sulla Combustione - CNR, Napoli, Italy

2. Dipartimento di Ingegneria Chimica - Università Federico II di Napoli, Italy

9.8   Sequential Enlargement Combination of Separated Effect Contributions for the Analysis of Liquid Jet Atomization in Cross -flow  Conditions

R. Ragucci1, A. Bellofiore2, G. Carulli2, A. Cavaliere2

1. Istituto di Ricerche sulla Combustione - CNR, Napoli, Italy

2. Dipartimento di Ingegneria Chimica - Università Federico II di Napoli, Italy

9.9   Infrared analysis of the interaction between fuel jet and convective hot field in counter flow conditions

A. Amoresano1, C. Allouis2

1. Dipartimento di Ingegneria Meccanica - Università Federico II di Napoli, Italy

2. Istituto di Ricerche sulla Combustione - CNR, Napoli, Italy

10:30-11:15

Oral outlining

11:15-12:15

Poster presentation

 

12:15

Concluding Remarks